SCHOLARLY CONTRIBUTIONS

 

Books:

 

1.     Recent Advances in Polymer Science, eds. G. L. Wilkes and B. Maxwell, Polym. Sympos. Series Vol. 46, Interscience, New York, (1974).

 

2.     Better Ceramics Through Chemistry VII: Organic/Inorganic Hybrid Materials, edited by Bradley K. Coltrain, Clément Sanchez, Dale W. Schaefer and Garth L. Wilkes, Vol. 435, Materials Research Society Symposium Proceedings, 680 pages, (1996).

 

3.     Ionomers: Synthesis, Structure, Properties and Applications, M. R. Tant, K. A. Mauritz and G. L. Wilkes, Eds., Chapman & Hall, London, (1997).

 

Book Chapters & Reviews:

 

1.               G. L. Wilkes, “The Measurement of Molecular Orientation in Polymeric Solids,” Advances in Polymer Science, (Hochpolymeren‑Forsch.), Bd. 8/1, 91, (1970).

 

2.               G. L. Wilkes and B.T. Vu, “Superstructure in Films of Bio- and Biorelated Polymers as Noted by Small Angle Light Scattering,” in Structure and Properties of Polymer Films, eds. R. Lenz and R. Stein, Plenum Press, Page 39, (1973).

 

3.               G. L. Wilkes and S. L. Samuels, “Rheo‑Optical Studies of Block and Segmented Copolymers ‑ A Review,” in Block and Graft Copolymers, eds., J. Burke and V. Weiss, Syracuse Univ. Press, (1973).

 

4.               G. L. Wilkes, Ian Brown and R. H. Wildnauer, “Biomechanical Properties of Skin,” Critical Reviews in Bioengineering, 1, No. 4, 453, (1973).

 

5.               G. L. Wilkes, “Rheo‑Optical Techniques and Their Application to Polymeric Solids,” J. Macromol. Sci. (Review Paper) C10(2), 149, (1974).

 

6.               R. S. Stein and G. L. Wilkes, “Physico‑Chemical Approaches to the Measurement of Anisotropy and Orientation,” Chapter in Anisotropy in Polymers, ed. by I. M. Ward, Applied Sci. Publishers, London, (1975).

 

7.               G. L. Wilkes, “Necessary Considerations for Selecting a Polymeric Material for Implantation with Emphasis on Polyurethanes,” Polymers in Surgery and Medicine, ed. Z. Oser, Plenum Press, Pg. 45, (1975).

 

8.               L. Rebenfeld, D. Weigmann, P. Makarewicz and G. L. Wilkes, “Interactions Between Solvents and Polymers in the Solid Sate,” J. Macromol. Sci., Rev. Macromol. Chem. C15(2), 279, (1976).

 

9.               Z. H. Ophir and G. L. Wilkes, “Time Dependence of Mechanical Properties and Domain Formation of Linear and Crosslinked Segmented Polyurethanes,” Proceedings of Symposium on Multicomponent Polymer Systems, Plenum Press, Adv. Chem. Series, 176, (1979).

 

10.            G. L. Wilkes, P. C. Mody and M. R. Tant, “An Overview of Amorphous Chains in Block and Segmented Copolymers: Their Influence on Bulk Structure and Material Properties,” Polymer Engineering and Science, 19, No. 14, 1029‑1041, (1979).

 

11.            Y. Mohajer, G. L. Wilkes, I. C. Wang, J. E. McGrath, “Effects of Variation of Composition and Block Sequence on Properties of Copolymers Containing Semicrystalline Blocks,” ACS Symposium Series, #193, Elastomers and Rubber Elasticity, J. E. Mark and J. Lal editors, American Chemical Society, (1982).

 

12.            Saad Abouzahr and G. L. Wilkes, “Segmented Copolymers with Emphasis on Segmented Polyurethanes,” in Processing, Structure and Properties of Block Copolymers, M. J. Folkes, Ed., Elsevier Applied Science Publishers, London, (1985).

 

13.            J. S. Riffle, I. Yilgor, C. Tran, G. L. Wilkes, J. E. McGrath and A. K. Banthia, “Elastomeric Polysiloxane Modifiers for Epoxy Networks. I. Synthesis of Functional Oligomers and Network Formation Studies,” ACS Symposium Series, ed. R. Bauer, 221, Am. Chem. Soc., Washington, DC, pg. 21, (1983).

 

14.            D. G. Baird and G. L. Wilkes, “Co‑Injection Molding of Thermotropic Copolymers and Filled Polyethyleneterephthalate,” In Interrelations Between Processing, Structure and Properties of Polymeric Materials, J. C. Seferis, Ed., Plenum Press, (1983).

 

15.            J. E. McGrath, J. S. Riffle, A. K. Banthia, I. Yilgor and G. L. Wilkes, “An Overview of the Polymerization of Cyclosiloxanes,” in ACS Symp. Series No. 212, Initiation of Polymerization, F. E. Bailey, Jr., (1983).

 

16.            E. M. Yorkgitis, C. Tran, N. S. Eiss, Jr., T. Y. Hu, I. Yilgor, G. L. Wilkes and J. E. McGrath, “Siloxane Modifiers for Epoxy Resins,” Advances in Chemistry Series, 208, ed. C. K. Riew and J. K. Gillham, ACS Washington, DC, pg. 137, (1984).

 

17.            E. G. Joseph, G. L. Wilkes and D. G. Baird, “Preliminary Thermal and Structural Studies of Blends Based on a Thermotropic Liquid Crystalline Copolyester and Polyethylene Terephthalate,” in Polymeric Liquid Crystals, A. Blumstein, Ed., Plenum Press, New York, pg. 197, (1985).

 

18.            G. L. Wilkes, "Orientation in Polymers,” Encyclopedia of Materials Science and Engineering, M. B. Bever, Editor, Pergammon Press, New York, pg. 3347, (1986).

 

19.            I. Duvdevani, R. D. Lundberg, C. Wood-Cordova and G. L. Wilkes, “Modification of Ionic Associations by Crystalline Polar Additives,” ACS Symposium Series, 302, Coulombic Interactions in Macromolecular Systems, eds. A. Eisenberg and F. E. Bailey, (1986).

 

20.            M. R. Tant and G. L. Wilkes, "Viscoelastic Behavior of Ionomers in Bulk and Solution,” M. Pineri and A. Eisenberg (eds.), Structure and Properties of Ionomers, 191-226, D. Reidel Publishing Co., (1987).

 

21.            G. L. Wilkes, "Polymers, Mechanical Behavior,” Encyclopedia of Physical Science and Technology, 2, pg. 61, Academic Press, Inc., (1987).

 

22.            D. Tyagi, G. L. Wilkes, B. Lee and J. E. McGrath, “Morphology and Properties of Segmented Polyurethane‑Urea Copolymers Prepared by a t‑alcohol Chain Extension,” in Advances in Elastomers and Rubber Elasticity, eds. J. Lal and J. Mark, Plenum Press, NY, (1988).

 

23.            M. R. Tant and G. L. Wilkes, “An Overview of the Viscous and Viscoelastic Behavior of Ionomers in Bulk and Solution,” J. Macromol. Sci.‑Reviews in Macromol. Chem. & Phys., C28 (1), pg. 1‑63, (1988).

 

24.            G. L. Wilkes, “Rheo‑Optical Properties,” Chapter in Ency. Polymer Science and Engineering, 14, 2nd Edition, John Wiley & Sons, pgs. 542-621, (1988).

 

25.            H. Huang, R. H. Glaser and G. L. Wilkes, “New Hybrid Materials Incorporating Poly(tetramethylene oxide) into Tetraethoxysilane-Based Sol-Gel Glasses,” Chapter 29 in Inorganic and Organometallic Polymers - Macromolecules Containing Silicon, Phosphorus, and Other Organic Elements, Martel Zeldin, K. J. Wynne and H. R. Allcock, eds., ACS Symp. Series 360, (pgs. 354-376) Washington, DC, (1988).

 

26.            Ha‑Chul Kim, Abdel M. El‑Naggar, G. L. Wilkes, Youngtai Yoo and J. E. McGrath, “Structure‑Property Behavior of Caprolactone‑Allyl Glycidyl Ether Copolymers Cross‑Linked by Electron‑Beam Irradiation,” in Radiation Curing of Polymeric Materials, eds. Charles E. Hoyle and James F. Kinstle, ACS Symposium Series 417, 474-497, Washington, DC, (1990).

 

27.            G. L. Wilkes, H. H. Huang and R. H. Glaser, “New Inorganic-Organic Hybrid Materials Through the Sol-Gel Approach,” in Advances in Chemistry Series 224, Silicon-Based Polymer Science A Comprehensive Resource, eds. J. M. Zeigler and F. W. Gordon Fearon, ACS, Washington, DC, (1990).

 

28.            D. Rodrigues and G. L. Wilkes, “Features of Microwave Processing of Inorganic Organic Hybrid Networks (Ceramic) Materials,” eds. W. B. Snyder, Jr., W. H. Sutton, Magdi F. Iskander, and D. L. Johnson, Mat. Res. Soc. Symp. Proc., 18, 441, (1991).

 

29.            D. C. McHerron and G. L. Wilkes, “Electron Beam Irradiation of Polymerizable Polyaphrons ‑ A Method of Making Polymeric Microspheres,” in Radiation Effects on Polymers, R. L. Clough and S. Shalaby, eds., ACS Symposium Series, ACS, Washington, DC, pg. 200, (1991).

 

30.            J. K. DePorter, D. G. Baird and G. L. Wilkes, "The Effects of Thermal History on the Properties of Semicrystalline Thermoplastic Composites: A Review of Experimental and Numerical Investigations,” J. Macromol. Sci.‑Reviews in Macromolecular Chemistry and Physics, C33(1), 1‑79, (1993).

 

31.            M. A. Zumbrum, G. L. Wilkes and T. C. Ward, "Characterization of the Dynamic Mechanical and Dielectric Properties of UV and EB‑Cured Coatings,” Chapter 4 in Radiation Curing in Polymer Sci. & Tech., Vol. 3, Polymerization Mechanisms, J. P. Fouassier and J. F. Rabek, eds., Elsevier Sci. Publishers, London, pgs. 102-151, (1993).

 

32.            M. R. Tant and G. L. Wilkes, “Structure and Properties of Hydrocarbon-Based Ionomers,” in Ionomers: Synthesis, Structure, Properties and Applications, M. R. Tant, K. A. Mauritz and G. L. Wilkes, Editors, Chapman and Hall, Publisher, (1997).

 

33.            R. S. Stein and G. L. Wilkes, “Physico-Chemical Approaches to the Measurement of Anisotropy,” Chapter 2 in Structure and Properties of Oriented Polymers, edited by I. M. Ward, Chapman & Hall, London, 2nd edition (1997).

 

34.            J. Wen and G. L. Wilkes, "Organic/Inorganic Composites,” The Polymeric Materials Encyclopedia: Synthesis, Properties and Applications, editor, J. Salamone, Vol. 6, pgs. 4782-4792, July, (1996).

 

35.            C. G. Robertson and G. L. Wilkes, “Structural Relaxation and Fragility of Glass-Forming Miscible Blends Composed of Atactic Polystyrene and Poly(2,6-dimethyl-1, 4-phenylene oxide),” Chapter 9 in Structure and Properties of Glassy Polymers, editors M. R. Tant and A. J. Hill, ACS Symposium Series 710, American Chemical Society, Washington, DC, 133-143 (1998).

 

36.            G. L. Wilkes, “Hybrid Organic-Inorganic Materials, Structural and Compositional Characterization of,” Ency. of Materials: Science & Technology, 3867-3878 (2001).

 

37.            G. L. Wilkes, “Polymers, Mechanical Behavior,” Ency. Physical Sci. & Technology, Vol. 12, pg. 697-722, Academic Press (2002).

 

38.            G. L. Wilkes, “Mechanical Properties,” Comprehensive Desk Reference of Polymer Characterization and Analysis, Ed., Robert F. Brady, Jr., American Chemical Society, Oxford University Press, 624-668, (2003).

 

39.            J. P. Sheth and G. L. Wilkes, “Semi-Crystalline Segmented Poly(ether-block-amide) Copolymers: An Overview Of Their Solid-State Structure Property Relationships And Uniaxial Deformation Behavior,” submitted as part of book to S. Fakirov, (2003).

 

Research Articles (Refereed Journals)

 

1.   An-Lac Nguyen and G. L. Wilkes, “A Thromboresistant Surface by Enzyme Immobilization,” J. Biomed. Mater. Res., 8, pg. 261-276, (1974).

 

2.   W. A. Cote, Jr., A. C. Day, G. L. Wilkes and R. H. Marchessault, "Particle Packing in Latex Film,” J. Colloid & Interface Sci., 27, 32, (1968).

 

3.   R. S. Stein and G. L. Wilkes, "Scattering of Light from Deformed Regions Surrounding Voids and Inclusions in High Polymers,” J. Polym. Sci., A‑2, 7, 1695, (1969).

 

4.   G. L. Wilkes and R. S. Stein, "Effect of Morphology on the Mechanical and Rheo‑Optical Properties of a Styrene‑Butadiene‑Styrene Block Copolymer,” J. Poly. Sci., A‑2, 7, 1525, (1969).

 

5.   P. J. Phillips, G. L. Wilkes, B. W. Delf and R. S. Stein, "The Dielectric and Rheo‑Optical Properties of Some Ethylene‑Carbon Monoxide Copolymers,” J. Poly. Sci., A‑2, 9, 422, (1971).

 

6.   M. Fukada, G. L. Wilkes and R. S. Stein, "The Stress‑Optical Coefficient of Poly‑1, 4‑Butadienes,” J. Poly. Sci., A‑2, 9, 1417, (1971).

 

7.   G. L. Wilkes and R. S. Stein, "An Apparatus for Instantaneously Measuring U.V., Visible or Infrared Dichroism from Thin Polymer Films,” J. Poly. Sci., A-2, 9, 2151, (1971).

 

8.   G. L. Wilkes, "Cold Rolling of Polyethylene I. The Superstructure of Cold Rolling Low Density Polyethylene as Noted by XYZ Light Scattering,” J. Material Sci., 6, 1465, (1971).

 

9.   G. L. Wilkes, "The Technique of XYZ Photographic Light Scattering as Applied to Uniaxially Drawn Polyethylene,” J. Poly. Sci., A‑2, 9, 1531, (1971).

 

10. Sam L. Samuels and G. L. Wilkes, "Anisotropic Superstructure in Segmented Polyurethanes as Measured by Photographic Light Scattering,” J. Poly. Sci., B9, 761, (1971).

 

11. G. L. Wilkes, "Comments on Light Scattering from Anisotropic Regions in ABA Block Copolymers,” J. Poly. Sci. A‑2, 767, (1972).

 

12. G. L. Wilkes, "Superstructure in Synthetic Polypeptides as Noted by Small Angle Light Scattering,” Molecular & Liquid Crystals, 18, 165, (1972).

 

13. G. L. Wilkes, “Unique and Highly Developed Superstructure in Films of Poly-t-benzyl-L-glutamate Cast in the Presence of a Magnetic Field,” J. Poly. Sci. B10, 935, (1972).

 

14. G. L. Wilkes, A. Nguyen and R. Wildnauer, "Structure Property Relationships of Human and Neonatal Rat Stratum Corneum. I. Thermal Stability of the Crystalline Lipid Structure as Studied by X‑Ray Diffraction and Differential Thermal Analysis (DTA),” Biochim. Biophy. Acta., 304, 267, (1973).

 

15. G. L. Wilkes, "Superstructure in the Stratum Corneum of Neonatal Rat,” Biochim. Biophys. Acta, 304, 290, (1973).

 

16. Sam L. Samuels and G. L. Wilkes, "Comments on the Multiple Endothermic Behavior Observed in Segmented Urethane Systems,” J. Polym. Sci., A‑2, 11, 807, (1973).

 

17. G. L. Wilkes and R.H. Wildnauer, "Structure-Property Relationships of the Stratum Corneum of Human and Neonatal Rat.  II. Dynamic Mechanical Studies,” Biochim. Biophys. Acta, 304, 376, (1973).

 

18. Sam L. Samuels and G. L. Wilkes, "The Rheo-Optical and Mechanical Behavior of a Systematic Series of Hard-Soft Segmented Urethanes,” Polym. Symposia C43, 149, (1973).

 

19. G. L. Wilkes and S. L. Samuels, "Porous Segmented Polyurethanes - Possible Candidates as Biomaterials,” J. Biomed. Materials Res. 7, 541, (1973).

 

20. S. L. Samuels and G. L. Wilkes, "Effects of Gamma Radiation on the Dynamic Mechanical and Swelling Behavior of Styrene Butadiene Block and Random Copolymers,” Polym. Sci. & Engr., 13, 281, (1973).

 

21. J. H. Southern and G. L. Wilkes, "Transparent High Density Polyethylene Films Crystallized Under Orientation and Pressure,” J. Polym. Sci., B11, 555, (1973).

 

22. A. Nguyen, B.T. Vu and G. L. Wilkes, "Initial Dynamic Mechanical and Dielectric Studies on a Systematic Series of g Glutamate Polypeptides,” Macaromol. Sci., B9(3), 376, (1974) and Book on Proceedings of Thermomechanical Symposium held in NY, (1972).

 

23. A. Nguyen, B.T. Vu and G. L. Wilkes, "The Dynamic Mechanical Dielectric and Melting Behavior of Reconstituted Collagen,” Biopoly. 13, 1203, (1974).

 

24. A. B. Desai and G. L. Wilkes, "Morphology Studies on Solvent Induced Crystallization of Polyethylene Terephthalate,” J. Polym. Sci., B12, 113, (1974).

 

25. G. L. Wilkes and P. Wilkes, "Evidence for In Vivo Anistropic Rod Structure in Collagenous Tissue as Noted by Small Angle Light Scattering,” Biopoly., 13, 411, (1974).

 

26. G. L. Wilkes, S. L. Samuels and R. Crystal, "Scanning and Transmission Electron Microscopy Studies on a Model Series of Spherulitic Segmented Polyurethanes,” J. Macro. Sci. Phys., B10(2) 203, (1974).

 

27. C. M. Chu and G. L. Wilkes, "Scanning Electron Microscopy and Small Angle Light Scattering Studies of Spherulitic Films of Polyethylene Terephthalate,” J. Macromol. Sci. Phys., B10(2), 231, (1974).

 

28. G. L. Wilkes and C. M. Chu, "SEM Studies of Cold Rolled Spherulitic Films of Poly (tetramethylene terephthalate),” J. Appl. Polym. Sci., 18, 2221, (1974).

 

29. C. M. Chu and G. L. Wilkes, "Superstructure in Chemically Etched Poly(ethylene terephthalate),” J. Macromol. Sci.‑Phys. B10(4) 551, (1974).

 

30. A. B. Desai and G. L. Wilkes, "Solvent Induced Crystallization of Poly(ethylene Terephthalate),” J. Polym. Sci., C46, 291, (1974).

 

31. G. L. Wilkes, A. Nguyen and R. Wildnauer, "Dynamic Mechanical and Thermal Properties of the Stratum Corneum Layer of Epidermis,” Macromol. Sci. Phys. B9(2), 333 (1974).

 

32. J. H. Grezlak and G. L. Wilkes, “The Preparation and Physical Properties of Polyester-Poly(methyl methacrylate) Triblock Copolymers,” J. Appl. Polym. Sci., 19, 769, (1975).

 

33. A. B. Desai and G. L. Wilkes, “A Method for Evaluating the Dynamic Mechanical Properties of a Polymer Fiber on Film Immersed in a Liquid Environment,” Textile Research Journal, 45(2), 173, (1975).

 

34. G. L. Wilkes, S. Bagrodia, W. Humphries and R. Wildnauer, "The Time Dependence of the Thermal and Mechanical Properties of Segmented Urethanes Following Thermal Treatment,” Polymer Letters, 13, 321, (1975).

 

35. P. Chang and G. L. Wilkes, "Superstructure in Segmented Polyether Urethanes,” J. Polym. Sci. A (13) 455, (1975).

 

36. A. Misra, C. Chu, R.S. Stein, G. L. Wilkes and A.B. Desai, "Inducement of Apparent Anisotropic Superstructure in Amorphous Cold Drawn Polyethylene Terephthalate,” J. Polym. Sci. B13, 303, (1975).

 

37. G. L. Wilkes and R. Wildnauer, "The Kinetic Behavior of the Thermal and Mechanical Properties of Segmented Urethanes,” J. Appl. Phys. 46, 4148, (1975).

 

38. S. Bagrodia and G. L. Wilkes, "Effects of Solvent Casting Copolymer Materials as Related to Mechanical Properties,” J. Biomed. Mat. Res., 10, 101, (1976).

 

39. G. L. Wilkes, Y. Mohajer and W. Holaday, "Structural Studies of Single Spherulites and Spherulitic Films of Polymethyl‑D‑Glutamate,” J. Polym. Sci. Phys., 14, 251, (1976).

 

40. Y. Mohajer and G. L. Wilkes, "The Effect of Casting Solvent on the Material Properties of Poly (t‑methyl‑D‑Glutamate),” J. Polym. Sci. Phys., 14, 963, (1976).

 

41. G. L. Wilkes and J. Emerson, "Time Dependence of Small Angle X‑Ray Measurements on Segmented Polyurethanes Following Thermal Treatment,” J. Appl. Phys. 47, 4261, (1976).

 

42. G. L. Wilkes, B. Morra, J. Emerson and R. Wildnauer, “Time Dependent Structure Property Behavior of Segmented Polyurethanes Following Thermal Treatments,” Proc. Int. Congr. Rheol., 7th, pg. 224, (1976).

 

43. G. L. Wilkes and R. H. Marchessault, "Light Scattering Characterization of Polyvinyl Acetate Latex Films,” J. Appl. Phys. 37, 3947, (1977).

 

44. Y. Mohajer, W. Holaday and G. L. Wilkes, “Preparation and Structure-Property Studies on Copolypeptides of t-Methyl Glutamate-Glutamic Acid and g-Methyl Glutamate-g-Benzyl Glutamate,” J. Polym. Sci.: Polym. Chem. Ed., 15, 2935-2960, (1977).

 

45. G. L. Wilkes and R. S. Stein, "Applications of Rheo‑optical Methods to the Characterization of Multiphase Multicomponent Polymer Systems,” J. Polym. Sci. Sympos. 60, 121, (1977).

 

46. W. G. Bradley and G. L. Wilkes, “Some Mechanical Property Considerations of Reconstituted Collagen for Drug Release Supports,” Biomat. Med. Devices and Art. Organs, 5(2), 159, (1977).

 

47. R. Assink and G. L. Wilkes, "Pulsed Nuclear Magnetic Resonance for Studying Phase Separation in Block and Segmented Copolymers,” Polym. Engr. & Sci., 17(8), 606, (1977).

 

48. P. J. Makarewicz and G. L. Wilkes, "Liquid Induced Crystallization of Poly(ethylene‑2,6 Naphthalate),” J. Appl. Polym. Sci., 22, 3347, (1978).

 

49. G. L. Wilkes, H. Jameel and L. Manzione, "Small Angle Light Scattering from Shish Kabob Structure,” Polym. Letters, 16, 243, (1978).

 

50. Z. H. Ophir, J. Z. Emerson and G. L. Wilkes, "Sub Tg Annealing Studies of Rubber Modified and Unmodified Epoxy Systems,” J. Appl. Physics 49(10), 5032, (1978).

 

51. G. L. Wilkes, S. Bagrodia, Z. Ophir and J. Emerson, "Systematic Structure‑Property Study of the Effect of Casting Solvent on the Bulk Properties of Linear SBS Block Copolymers,” J. Appl. Phys. 49(10), 5060, (1978).

 

52. P. J. Makarewicz and G. L. Wilkes, "Diffusion Studies of Liquid and Vapor Induced Crystallized Poly(ethylene terephthalate),” J. Polym. Sci. Phys., 16, 1529, (1978).

 

53. P. Makarewicz, G. L. Wilkes, and Y. Budnitsky, "Mechanical Property Studies of Liquid Induced Crystallized Poly(ethtlene terephthalate),” J. Polym. Sci. Phys., 16, 1545, (1978).

 

54. P. J. Makarewicz and G. L. Wilkes, "Small Angle X‑ray Scattering and Crystallization Kinetics Studies of the Liquid Induced Crystallization of Poly(ethylene trephthalte),” J. Polym. Sci. Phys., 16, 1559, (1978).

 

55. P. J. Makarewicz and G. L. Wilkes, "Structural Rearrangements in the Liquid Induced Crystallization of Cold Drawn Poly(ethylene terephthalate),” Textile Res. J., 48(3), 136, (1978).

 

56. P. J. Makarewicz and G. L. Wilkes, "Morphology Studies of the Liquid Induced Crystallization of Poly(ethylene terephthalate): Effects of Polymer Blending, Nucleating Agents and Molecular Weight,” J. Appl. Poly. Sci., 23, 1619, (1979).

 

57. G. L. Wilkes, T. S. Dziemianowicz and Z. H. Ophir, "Thermally Induced Time Dependence of Mechanical Properties in Biomedical Grade Polyurethanes,” J. Biomed. Materials Res. 13, 189, (1979).

 

58. Z. H. Ophir and G. L. Wilkes, "A SAXS Analysis of a Linear Polyester and a Liner Polyether Urethane - Interfacial Thickness Determination,” J. Polym. Sci. Phys. 18, 1469, (1980).

 

59. E. W. Kong and G. L. Wilkes, "Observations Regarding the Effect of Deformation on the Domain Structure in Segmented Polyurethanes,” Polym. Letters, 18, 369, (1980).

 

60. P. C. Mody, G. L. Wilkes and K. B. Wagener, "Structure Property Relationships of a New Series of Segmented Polyether‑Polyester Copolymers,” J. Appl. Polym. Sci., 26, 2853, (1981).

 

61. M. R. Tant and G. L. Wilkes, "Physical Aging Studies of Styrene‑Butadiene and Carbonate‑Siloxane Block Copolymers,” Polym. Engr. Sci., 21(6) 326, (1981).

 

62. Y. Mohajer, G. L. Wilkes and J. E. McGrath, "Influence of Tacticity and Sorbed Water on the Material Properties of Poly‑(N,N'‑Dimethyl Acrylamide),” J. Appl. Polym. Sci., 26, 2827, (1981).

 

63. S. Abouzahr and G. L. Wilkes, "SAXS Studies of Segmented Polyether (urethane urea) Elastomers,” Macromol. 14, 456, (1981).

 

64. M. R. Tant and G. L. Wilkes, "An Overview of the Nonequilibrium Behavior of Polymer Glasses,” Polym. Engr. & Sci., 21(14), 874, (1981).

 

65. E. S. W. Kong, Y. Mohajer, J. Dun, G. L. Wilkes, A. Banthia and J. E. McGrath, “Physical Aging Studies of Glassy Epoxy Networks,” Polym. Engr. & Sci., 21(14), 874, (1981).

 

66. I. C. Wang, Y. Mohajer, T. C. Ward, G. L. Wilkes and J. E. McGrath, “Anionic Copolymerization of Butadiene Isoprene with Organolithium Initiation in Hexane,” Adv. in Anionic Polymerization, Ed. J. E. McGrath, ACS Symposium Series, 166, pg. 529, (1981).

 

67. R. A. Assink and G. L. Wilkes, "The Study of Domain Structure in Linear and Crosslinked Polyurethanes Using Pulsed NMR,” J. Appl. Polym. Sci., 26, 3689, (1981).

 

68. E. Joseph, G. L. Wilkes and K. Park, "Structure‑Property Relationships of an Electron Beam Cured Model Urethane Prepolymer,” J. Appl. Polym. Sci., 26, 3355, (1981).

 

69. E. Kong, G. L. Wilkes, J. E. McGrath, A. K. Banthia, Y. Mohajer, and M. R. Tant, "Physical Aging of Linear and Network Epoxy Resins,” Polymer Engr. & Sci., 21(14), 943, (1981).

 

70. I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes and J. E. McGrath, "A DSC Kinetic Study of the Epoxy Network System Bisphenol‑A Diglycidylether‑Bis(4)‑Amino Cyclohexyl) Methane,” Polym. Bull., 4, 323, (1981).

 

71. M. R. Tant and G. L. Wilkes, "Physical Aging Studies of Semi‑crystalline Poly(ethylene Terephthalate),” J. Applied Polym. Sci., 26, 2813, (1981).

 

72. Y. Mohajer and G. L. Wilkes, "Structure/Property Behavior of Films Containing Disc Spherulites ‑ A Model Study,” J. Polym. Sci.: Phys., 20 (457), (1982).

 

73. S. Abouzahr, Y. Mohajer, G. L. Wilkes and J. E. McGrath, "Chemo‑Rheological Studies of Isoprene‑Butadiene Networks,” Polymer, 23, 1519, (1982).

 

74. Y. Mohajer, G. L. Wilkes, I. C. Wang, and J. E. McGrath, "Hydrogenated Linear Block Copolymers of Butadiene and Isoprene: Effect of Variation of Composition in Sequence Architecture on Properties,” Polymer, 23, 1523, (1982).

 

75. S. Abouzahr, Z. Ophir and G. L. Wilkes, "Structure Property Behavior of Segmented Polyether‑MDI‑Butanediol Based Urethanes‑Effect of Composition Ratio,” Polymer, 23, 1077, (1982).

 

76. G. L. Wilkes, "Seeing Intimate Structure,” Chemtech, 13, 174‑179, (1983).

 

77. I. Yilgor, E. Yilgor, A. K. Banthia, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of Free Radical Cured Bis‑Methacryloxy Bisphenol‑A and Epoxy Networks,” Polymer Composites, 4, 120‑125, (1983).

 

78. Y. Mohajer, D. Tyagi, G. L. Wilkes, R. Storey and J. P. Kennedy, "New Polyisobutylene Based Model Ionomers, 3. Further Mechanical and Structural Studies,” Polym. Bull., 8, 47, (1982).

 

79. S. Bagrodia, Y. Mohajer, G. L. Wilkes, R. F. Storey and J. P. Kennedy, "New Polyisobutylene Based Model Ionomers, 4. Strain Induced Crystallization of Low Molecular Weight Model Ionomers,” Polym. Bull., 8, 281, (1982).

 

80. I. Yilgor, J. S. Riffle, G. L. Wilkes, and J. E. McGrath, "Siloxane‑Urea Segmented Copolymers: I. Synthesis and Characterization of Model Polymers from MDI and a, w bis(aminopropyl) poly(dimethyl‑siloxane),” Polym. Bull., 8, 535, (1982).

 

81. D. Tyagi, G. L. Wilkes, I. Yilgor and J. E. McGrath, "Siloxane‑Urea Segmented Copolymers: II. Investigation of Mechanical Behavior,” Polym. Bull., 8, 543, (1982).

 

82. S. Bagrodia, Y. Mohajer, G. L. Wilkes, R. F. Storey, J. P. Kennedy, “New Polyisobutylene‑Based Model Ionomers. 5. The Effect of Molecular Weight on the Mechanical Properties of Tri‑Arm‑Star Polyisobutylene‑Based Model Ionomers,” Polym. Bull. (Berlin) 9, 174‑80, (1983).

 

83. G. L. Wilkes, S. Abouzahr and D. Radovich, "Small Angle X‑Ray Scattering from Polyurethane Foams of Different Composition:  An Analytical Method for Better Understanding Their Fine Structure,” Journal of Cellular Plastics, 19, 248, (1983).

 

84. D. G. Baird and G. L. Wilkes, "Sandwich Injection Molding of Thermotropic Copolyesters and Filled Polyester,” Polym. Engr. & Sci., 23(11), 632, (1983).

 

85. Y. Mohajer, E. Yorkgitis, G. L. Wilkes and J. E. McGrath, "Physical Aging Studies of Epoxy Resins with Emphasis on Graphite Fiber ‑ Epoxy Composites,” J. International Journal of Hybrid Microelectronics, 6, 360, (1983).

 

86. S. Bagrodia, R. Pisipati, G. L. Wilkes, R. F. Storey and J. P. Kennedy, "Melt Rheology of Ion Containing Polymers. I. Effect of Molecular Weight and Excess Neutralizing Agent in Model Elastomeric Sulfonated Polyisobutylene Based Ionomers,” J. Applied Polym. Sci., 29, 3065, (1984).

 

87. Y. Mohajer, S. Bagrodia, G. L. Wilkes, R.F. Storey and J.P. Kennedy, "New Polyisobutylene Based Model Elastomeric Ionomers. VI. The Effect of Excess Neutralizing Agents on Solid State Mechanical Properties,” J. Appl. Polym. Sci., 29, 1943‑1950, (1984).

 

88. E. Joseph, G. L. Wilkes and D. G. Baird, "Effect of Thermal History on the Morphology of Thermotropic Liquid Crystalline Copolyesters Based on PET and PHB,” Polymer, 26(5), (1985).

 

89. E. G. Joseph, G. L. Wilkes and D. G. Baird, "Effect of Flow History on the Morphology of Thermotropic Liquid Crystalline Copolyesters,” Polym. Engr. & Sci., 25(7) 377, (1985).

 

90. V. Saraf, W. G. Glasser, G. L. Wilkes and J. E. McGrath, "Engineering Plastics from Lignin. IV. Structure Property Relationships of PEG ‑ Containing Polyurethane Networks,” J. Appl. Polym. Sci., 30, 2207, (1985).

 

91. Y. Mohajer, G. L. Wilkes and B. Orler, "Effect of Prestrain on the Subsequent Thermal Crystallization of a Copolyester of Lactic and Glycolic Acid,” Polym. Engr. & Sci., 24, No. 5, 319‑327, (1984).

 

92. S. Bagrodia and G. L. Wilkes, "Comments on the Effect of Cation Type on Ionomer Properties,” Polym. Bull., 12, 389, (1984).

 

93. S. Abouzahr and G. L. Wilkes, "Structure‑Property Studies of Polyester and Polyether‑Based MDI‑BD Segmented Polyurethanes:  Effect of I Versus II Stage Polymerization Conditions,” J. Appl. Polym. Sci., 29, 2695, (1984).

 

94. I. Yilgor, A. Shah'aban, W. P. Steckle, Jr., D. Tyagi, G. L. Wilkes and J. E. McGrath, "Segmented Organo Siloxane Copolymers. I. Synthesis of Siloxane‑Urea Copolymers,” Polymer, 25(12), pg. 1802, (1984).

 

95. D. Tyagi, I. Yilgor, J. E. McGrath and G. L. Wilkes, "Segmented Organo Siloxane Copolymers. II. Thermal and Mechanical Properties of Siloxane‑Urea Copolymers,” Polymer, 25(12), p. 1807, (1984).

 

96. D. G. Baird and G. L. Wilkes, "Co‑injection Molding of Thermotropic Copolyesters and Filled Poly(ethylene Terephthalate),” Mater. Sci. Monog., 21, 351‑62, (1984).

 

97. E. M. Yorkgitis, N. S. Eiss, Jr., C. Tran, G. L. Wilkes and J. E. McGrath, "Siloxane Modified Epoxy Resins,” in Advances in Polymer Science, Vol. 72, (1985).

 

98. G. G. Viola, D. G. Baird and G. L. Wilkes, "The Development of Molecular Orientation and Morphological Texture and Thermotropic Copolyesters,” Polym. Engr. & Sci., 25, pp. 833, (1985).

 

99. V. P. Saraf, W. G. Glasser and G. L. Wilkes, "Engineering Plastics from Lignin. VII. Structure‑Property Relationships of Poly(butadiene Glycol) ‑ Containing Polyurethane Networks,” J. Appl. Poly. Sci., 30, 3809, (1985).

 

100.  M. R. Tant, G. L. Wilkes, R. Storey and J. P. Kennedy, "Sulfonated Polyisobutylene Telechelic Ionomers. 10. Effects of Architecture and Molecular Weight on Viscosity Behavior in a Nonpolar Solvent,” Polym. Bull., 13, 541‑548, (1985).

 

101.  V. Saraf, W. G. Glasser, G. L. Wilkes and J. E. McGrath, "Engineering Plastics from Lignin. VI. Structure‑Property Relationships of PEG ‑ Containing Polyurethane Networks,” J. Appl. Polym. Sci., 30, 2207, (1985).

 

102.  S. R. Bagrodia, G. L. Wilkes and J.P. Kennedy, "New Polyisobutylene Based Model Elastomeric Ionomers. VIII. Thermal Mechanical Analysis,” J. Appl. Polym. Sci., 30, 2179, (1985).

 

103.  H. Huang, B. Orler and G. L. Wilkes, "Ceramers: Hybrid Materials Incorporating Polymeric/Oligomeric Species with Inorganic Glasses by a Sol Gel Process. 2. Effect of Acid Content on the Final Properties,” Polym. Bull., 14, 557‑564, (1985).

 

104.  R. C. Allen, G. L. Wilkes, I. Yilgor, D. Wu and J. E. McGrath, "Synthesis and Characterization of Poly(dimethylsiloxane) Based Liquid Crystals,” Makromol. Chem., 187, 2909‑2931, (1986).

 

105.  J. L. Hedrick, I. Yilgor, G. L. Wilkes and J. E. McGrath, "Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics. I. Phenolic Hydroxyl‑Terminated Poly(aryl ether sulfone)‑Epoxy Systems,” Polym. Bull. (Berlin) 13, 201‑8, (1985).

 

106.  D. Tyagi, J. L. Hedrick, D. C. Webster, J. E. McGrath and G. L. Wilkes, "Structure-Property Relationships in Perfectly Alternating Segmented Polysulfone/Poly (dimethylsiloxane) Copolymers,” Polymer, 29, pg. 833, (1988).

 

107.  S. Bagrodia, G. L. Wilkes and J. P. Kennedy, "New Polyisobutylene‑Based Model Elastomeric Ionomers: Rheological Behavior,” Polym. Engr. & Sci., 26:10, 662, (1986).

 

108.  D. Tyagi, J.  E. McGrath and G. L. Wilkes, "Small Angle X‑Ray Studies of Siloxane‑Urea Segmented Copolymers,” Polym. Engr. & Sci., 26:20, 1371, (1986).

 

109.  L. C. Lopez and G. L. Wilkes, "A New Etching Technique for Enhancement of Morphological Textures of Poly(P‑Phenylene Sulfide),” J. Polym. Sci.: Polym. Lett. Ed., 24, 573‑579, (1986).

 

110.  H. Huang, B. Orler and G. L. Wilkes, "Structure-Property Behavior of New Hybrid Materials Incorporating Oligomeric Species into Sol-Gel Glasses. 3. Effect of Acid Content, TEOS Content and Molecular Weight of Poly(dimethylsiloxane),” Macromolecules, 20, 1322‑1330, (1987).

 

111.  M. R. Tant, G. L. Wilkes and M. D. Read, "Sulfonated Polyisobutylene Telechelic Ionomers. XI. Viscoelastic Behavior of Concentrated Solutions of Zinc-Neutralized Ionomers in a Nonpolar Solvent,” J. Polym. Sci., Part C: Polym. Lett. Ed., 24, 619-625, (1986).

 

112.  S. Bagrodia, M. R. Tant, G. L. Wilkes and J. P. Kennedy, "Sulfonated Polyisobutylene Telechelic Ionomers. 12. Solid‑State Mechanical Properties,” Polymer, 28, 2207, (1987).

 

113.  M. R. Tant, J. H. Song, G. L. Wilkes, J. Horrion and R. Jerome, "Mechanical Properties of Carboxylato‑Telechelic Polyisoprene,” Polymer, 27, 1815‑18, (1986).

 

114.  D. Thompson, J. H. Song and G. L. Wilkes, "Electron Beam Effects on Polymers: Structure‑Property Behavior of Radiation‑Cured bis‑GMA,” J. Appl. Polym. Sci., 34, 1063‑1080, (1987).

 

115.  Hao‑Hsin Huang and Garth L. Wilkes, "Structure‑Property Behavior of New Hybrid Materials Incorporating Oligomeric Poly(tetramethylene Oxide) With Inorganic Silicates by a Sol‑Gel Process. 3. Effect of Oligomeric Molecular Weight,” Polym. Bull., 18, 455‑462, (1987).

 

116.  G. Vlaic, C. E. Williams, R. Jerome, M. R. Tant and G. L. Wilkes, "Microstructure of the Ionic Aggregates in Telechelic Ionomers,” Polymer, 29, 173, (1988).

 

117.  J. P. Armistead and G. L. Wilkes, "Morphology of Water‑Blown Flexible Polyurethane Foams,” J. Appl. Polym. Sci., 35, 601‑629, (1988).

 

118.  D. Thompson, J. H. Song and G. L. Wilkes, "Structure‑Property Behavior of Electron Beam Cured Bis‑GMA,” Polym. Mat. Sci. & Eng., 56, 754, (1987).

 

119.  R. Jorda and G. L. Wilkes, "Rapid Recrystallization of Freshly Melted Spherulites,” Polym. Bull., 19, 409‑415, (1988).

 

120.  R. H. Glaser and G. L. Wilkes, "Structure‑Property Behavior of Polydimethylsiloxane and Polytetramethylene Oxide Modified TEOS Based Sol Gel Materials: V. Effect of Titanium Isopropoxide Incorporation,” Polymer Bulletin, 19, 51‑57, (1988).

 

121.  L. C. Lopez and G. L. Wilkes, "Crystallization Kinetics of Polyphenylene Sulfide ‑ The Effect of Molecular Weight,” Polymer, 29, 106, (1988).

 

122.  A. M. El‑Naggar, H. C. Kim, L. C. Lopez and G. L. Wilkes, "Electron Beam Effects on Polymers: III. Mechanical and Thermal Properties of Electron Beam‑Irradiated Poly(phenylene Sulfide),” J. Appl. Polym. Sci., 37, 1655‑1668, (1989).

 

123.  H. Kim, J. Song, G. L. Wilkes, S. D. Smith and J. E. McGrath, "Electron Beam Effects on Polymers: II. Surface Modification of Bis‑GMA Substrates by Functionalized Siloxane Oligomers,” J. Appl. Polym. Sci., 38, 1515‑1533, (1989).

 

124.  C. U. Ko, G. L. Wilkes and C. P. Wong, "Morphological Studies of Blends Containing Liquid Crystalline Polymers with Poly(ethylene Terephthalate,” J. Appl. Polym. Sci., 37, 3063‑3083 (1989).

 

125.  D. Feng, L. Venkateshwaran, G. L. Wilkes, C. M. Leir and J. E. Stark, "Structure‑ Property Behavior of Elastomeric Segmented PTMO‑Ionene Polymers. II.,” J. Appl. Polym. Sci., 37, 1549 (1989).

 

126.  D. Feng, G. L. Wilkes and J. V. Crivello, "Effect of Casting Solvent on the Phase Separation and Structure‑Property Behavior of Free Radical Synthesized PDMS‑PS Block Polymers,” Polym. Mat. Sci. & Engr., 58, pg. 721, (1988).

 

127.  R. Jorda and G. L. Wilkes, "A Novel Use of Physical Aging to Distinguish Immiscibility in Polymer Blends,” Polym. Bull., 19, (1988).

 

128.  L. C. López, G. L. Wilkes and J. Geibel, "Crystallization Kinetics of Poly(p‑phenylene Sulfide): The Effect of Branching Agent Content and Endgroup Counterion" Polymer, 30, 147, (1989).

 

129.  L. C. López and G. L. Wilkes, "Non-isothermal Crystallization Kinetics of Poly (p‑phenylene Sulfide),” Polymer, 30, 882, (1989).

 

130.  L. C. López and G. L. Wilkes, "Poly(p‑phenylene sulfide) ‑ An Overview of an Important Engineering Thermoplastic,” J. Macromol. Sci.‑Reviews in Macromol. Chem. Phys., C29 (1), 83‑151, (1989).

 

131.  M. R. Tant, G. L. Wilkes and J. P. Kennedy, "Sulfonated Polyisobutylene Telechelic Ionomers. XIII. Viscosity Behavior in Nonpolar Solvents and Nonpolar‑Polar Solvent Mixtures,” J. Appl. Polym. Sci., 37, 2873‑2895, (1989).

 

132.  D. Feng, G. L. Wilkes and J. Crivello, "Structure‑Property Behavior of Free Radical Synthesized Polydimethylsiloxane‑Polystyrene Multiblock Polymers: I. Effect of the Siloxane Block Length,” Polymer, 30, pg. 1800, (1989).

 

133.  A. M. El‑Naggar, L. C. Lopez and G. L. Wilkes, "Effect of Electron Beam Radiation on the Mechanical and Thermal Properties of Poly(4‑Methylpentene‑1),” J. Appl. Polym. Sci., 39, 427‑446 (1990).

 

134.  R. Glaser, G. L. Wilkes and C.E. Bronnimann, "Solid State 29Si NMR of TEOS‑Based Multifunctional Sol‑Gel Materials,” J. Non‑Cryst. Solids, 113, 73‑87 (1989).

 

135.  H. Kim and G. L. Wilkes, "Time‑Temperature‑Energy (TTE) Diagram of Electron Beam Radiation Curing Systems‑‑Conceptual Features,” Radiation Curing, February/May, pg. 8, (1989).

 

136.  D. Feng, G. L. Wilkes, C. M. Leir and J. E. Stark, "Morphological Investigation of Polytetramethylene Oxide‑Dibromoxylene Segmented Ionene Polymers Using Transmission Electron Microscopy and Small Angle X‑Ray Scattering,” J. Macromol. Sci.‑Chem., A26(8), 1151‑1181, (1989).

 

137.  H. Huang, G. L. Wilkes and J. G. Carlson, "Structure‑Property Behavior of Hybrid Materials Incorporating Tetraethoxysilane with Multfunctional Poly(tetramethylene Oxide),” Polymer, 30, 2001, (1989).

 

138.  R. H. Glaser and G. L. Wilkes, "Polymer Modified Mixed Metal Alkoxide‑Metal Acetyl Acetonate Sol‑Gel Materials,” Polym. Bull., 22, 527‑532, (1989).

 

139.  G. L. Wilkes, H. Huang and R. H. Glaser, “New Inorganic-Organic Hybrid Materials Through the Sol-Gel Approach,” Silicon‑Based Polymer Science‑A Comprehensive Resource, eds. J. M. Zeigler and F.W. Gordon Fearon, Advances in Chem. Series 224, ACS, Washington, DC, (1990).

 

140.  G. L. Wilkes, A. B. Brennan, H. Huang, D. Rodrigues and B. Wang, "The Synthesis, Structure and Property Behavior of Inorganic‑Organic Hybrid Network Materials Prepared by the Sol Gel Process,” Mat. Res. Soc. Symp. Proc., 171, pg. 15, (1990).

 

141.  A. M. El‑Naggar, L. C. Lopez and G. L. Wilkes, "Effect of Electron Beam Radiation on the Mechanical and Thermal Properties of Poly(4‑methylpentene‑1),” J. Appl. Polym. Sci., 39, 427‑446, (1990).

 

142.  D. G. Baird, T. Sun, D. S. Done and G. L. Wilkes, “In‑Situ Formation of Reinforced Thermoplastic Composites: Ultem/Vectra,” J. Thermoplastic Composite Materials, 3, 81-88, January, (1990).

 

143.  B. Wang, A. B. Brennan, H. Huang and G. L. Wilkes, "Synthesis and Characterization of New Alumina and Titania‑Containing Hybrid Network Ceramer Materials from Sol‑Gel Processing,” J. Macromol. Sci.‑Chem., A27(12), 1447‑1468, (1990).

 

144.                                                 H. Kim, A. M. El‑Naggar and G. L. Wilkes, "Electron Beam Effects on Polymers: V. Symmetric and Asymmetric Materials Based on the Controlled Distribution of bis‑GMA into Crosslinked Nitrile Rubber Films Prior to Curing by Electron Beam Radiation,” J. Appl. Polym. Sci., 42, 1107‑1119, (1991).

 

145.  L. N. Venkateshwaran, C. E. Leir and G. L. Wilkes, "Selective Plasticization of the Ionic Domains in a Segmented Thermoplastic Ionene Cationomer,” J. Appl. Polym. Sci., 43, 951‑966, (1991).

 

146.  M. R. Tant, G. L. Wilkes and J. P. Kennedy, "Sulfonated Polyisobutylene Telechelic Ionomers. XIV. Viscoelastic Behavior of Concentrated Solutions in Nonpolar Solvents,” J. Appl. Polym. Sci., 42, 523‑532, (1991).

 

147.  John Lee W. Noell, Garth L. Wilkes, Dillip K. Mohanty and James E. McGrath, "The Preparation and Characterization of New Polyether Ketone‑ Tetraethylorthosilicate Hybrid Glasses by the Sol‑Gel Method,” J. Appl. Polym. Sci., 40, 1177‑1194, (1990).

 

148.  J. Z. Wang, D. A. Dillard, M. P. Wolcott, F. A. Kamke and G. L. Wilkes, "Transient Moisture Effects in Fibers and Composite Materials,” J. Composite Materials, 24, 994-1009, (1990).

 

149.  A. B. Brennan, B. Wang, D. E. Rodrigues and G. L. Wilkes, "Structure‑Property Behavior of Novel Ti/Poly(tetramethylene oxide) (PTMO) and Zr/PTMO Hybrid Ceramer Materials Prepared by the Sol Gel Method,” J. Inorganic and Organometallic Polymers, 1, No. 2, (1991).

 

150.  J. C. Moreland, G. L. Wilkes and R. B. Turner, "Segmental Orientation Behavior of Flexible Water‑Blown Polyurethane Foams,” J. Appl. Polym. Sci., 43, 801‑815, (1991).

 

151.  D. C. McHerron and G. L. Wilkes, "Formation of Polymeric Microspheres Using Electron Beam Radiation,” J. Appl. Polym. Sci., 43, 1045‑1058, (1991).

 

152.  B. Wang and G. L. Wilkes, "New Ti‑PTMO and Tr‑PTMO Ceramer Hybrid Materials Prepared by the Sol‑Gel Method: Synthesis and Characterization,” J. Polym. Sci.: Part A: Polym. Chem., 29, 905‑909, (1991).

 

153.  J. T. Muellerleile, G. A. York and G. L. Wilkes, “Use of Permanganic Etching as a Means of Investigating the Morphological Structure of LARC-CPI ‑ A Semicrystalline Thermoplastic Polyimide,” Polym. Communications, 32, No. 6, 176-179, (1991).

 

154.  B. Wang, G. L. Wilkes, J. C. Hedrick, S. C. Liptak and J. E. McGrath, "New High Refractive Index Organic/Inorganic Hybrid Materials from Sol‑Gel Processing,” Macromolecules (Notes), 24, 3449‑3450, (1991).

 

155.  Neal R. Langley, Godfrey C. Mbah, Harvey A. Freeman, Hao‑Hsin Huang, E. J. Siochi, T. C. Ward and G. L. Wilkes, "Physical Structure of Polysilicate Particles in Organic Media,” J. Colloid & Interface Sci., 143, No. 2, (1991).

 

156.  L. C. Lopez and G. L. Wilkes, "Some Aspects of Carbon Fiber Type and Its Surface Treatment on the Nucleation Behavior of Poly(p‑Phenylene Sulfide) Based Composites,” J. Thermoplastic Composite Materials, 4, 58‑71, (1991).

 

157.  A. B. Brennan and G. L. Wilkes, "Structure‑Property Behavior of Sol‑Gel Derived Hybrid Materials: Effect of a Polymeric Acid Catalyst,” Polymer, 32, No. 4, 733-739, (1991).

 

158.  J. L. Hedrick, I. Yilgor, M. Jurek, J. C. Hedrick, G. L. Wilkes and J. E. McGrath, “Chemical Modification of Matrix Resin Networks with Engineering Thermoplastics: 1. Synthesis, Morphology, Physical Behavior and Toughening Mechanisms of Poly(arylene ether sulfone) Modified Epoxy Networks,” Polymer, 32, No. 11, 2020-2032, (1991).

 

159.  T. Sun, D. G. Baird, H. H. Huang, D. S. Done and G. L. Wilkes, "In Situ Formation of Thermoplastic Composites: Ultem/Vectra,” J. Composite Materials, 25, 788-808, (1991).

 

160.  B. Wang, G. L. Wilkes, C. D. Smith and J. E. McGrath, "High Refractive Index Hybrid Ceramer Materials Prepared from Titanium Tetraisopropoxide and Poly(arylene ether phosphine oxide) Through Sol‑Gel Processing,” Polym. Comm., 32(13), 400-402, (1991).

 

161.  D. Feng and G. L. Wilkes, “Chain Extension in Unoriented Ion Containing Polymers - Does it Occur?” Macromolecules (Communication), 24, 6788‑6790, (1991).

 

162.  S. D. Smith, J. M. DeSimone, H. Huang, G. York, D. W. Dwight, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of Poly (methyl methacrylate)‑g‑ poly(dimethylsiloxane) Copolymers. 1. Bulk and Surface Characterization,” Macromolecules, 25, 2575‑2581, (1992).

 

163.  L. N. Venkateshwaran, M. R. Tant, G. L. Wilkes, P. Charlier and R. Jerome, "Structure‑Property Comparison of Sulfonated and Carboxylated Telechelic Ionomers Based on Polyisoprene,” Macromolecules, 25, 3996‑4001, (1992).

 

164.  D. C. McHerron and G. L. Wilkes, "DSC Analysis of Electron‑Beam Irradiated LARC‑CPI,” J. Appl. Polym. Sci., 46, 1313‑1327, (1992).

 

165.  L. N. Venkateshwaran, G. A. York, C. D. DePorter, J. E. McGrath and G. L. Wilkes, "Morphological Characterization of Well Defined Methacrylic Based Di‑ and Triblock Ionomers,” Polymer, 33, No. 11, 2277-2286, (1992).

 

166.  M. R. Tant, L. N. Venkateshwaran, J. H. Song, R. Subramanian and G. L. Wilkes, "Structure and Properties of Carboxylato‑Telechelic Polyisoprene,” Polymer, 33, No. 7, 1347, (1992).

 

167.  D. Feng, G. L. Wilkes, Bin Lee and J. E. McGrath, "Structure‑Property Behavior of Segmented Poly(tetramethylene Oxide)‑Based Bipyridinium Ionene Elastomers,” Polymer, 33, No. 3, 526-535, (1992).

 

168.  M. R. Tant, J. H. Song,  G. L. Wilkes, P. Charlier and R. Jerome, "Mechanical Properties of Complexed a,w-Diamino Polybutadiene,” J. Appl. Polym. Sci., 46, 2203-2209, (1992).

 

169.                                                 A. L. Ogden, M. W. Hyer, G. L. Wilkes and A. C. Loos, “The Development of an Alternative Thermoplastic Powder Prepregging Technique,” J. Thermoplastic Composite Materials, 5, January, (1992).

 

170.  A. L. Ogden, G. L. Wilkes, M. W. Hyer, A. C. Loos and J. T. Muellerleile, “The Evaluation of the Interfacial Behavior of LaRC‑TPI/Graphite Composites,” J. Thermoplastic Composite Materials, 5, pg. 256, July, (1992).

 

171.  V. Dave, W. G. Glasser and G. L. Wilkes, “Evidence for Cholesteric Morphology in Films of Cellulose acetate Butyrate by Transmission Electron Microscopy,” Poly. Bull., 29, No. 5, pg. 565, November, (1992).

 

172.  L. C. Lopez, G. L. Wilkes, P. M. Stricklen and S. A. White, "Synthesis, Structure and Properties of Poly(4‑Methyl‑1‑pentene),” J.M.S.‑Rev. Macromol. Chem. Phys., C32(3&4), 301‑406, (1992).

 

173.  D. E. Rodrigues, A. B. Brennan, C. Betrabet, B. Wang and G. L. Wilkes, "Structural Features of Sol‑Gel Derived Hybrid Inorganic‑Organic Network Ceramer Materials by Small‑Angle X‑ray Scattering,” Chem. Materials, 4, 1437‑1446, (1992).

 

174.  H. H. Huang, E. M. Yorkgitis and G. L. Wilkes, "A Morphological Study on the Plasticization of Poly(Vinyl Chloride) by Diethylhexyl Succinate and Dibutyl Phthalate,” J. Macromol. Sci.‑Phys., B32, No. 2, pg. 163-181, (1993).

 

175.  B. G. Risch, G. L. Wilkes and J. M. Warakomski, "Crystallization Kinetics and Morphological Features of Star‑Branched Nylon‑6: Effect of Branch‑point Functionality,” Polymer, 34, No. 11, pg. 2330-2343, (1993).

 

176.  D. C. McHerron and G. L. Wilkes, "Electron Beam Irradiation of Polystyrene ‑Poly(Vinyl Methyl Ether) Blends" Polymer,  34, No. 19, pg. 3976-3985, (1993).

 

177.  D. E. Rodrigues and G. L. Wilkes, "Small Angle X‑ray Scattering Investigations of Fractal Dimensions of Hybrid Inorganic Organic Network Materials (Ceramers) Based on Tetraethylorthosilicate and Polytetramethylene Oxide,” J. Inorganic and Organometallic Polymers, 3(3) 197-229, (1993).

 

178.  B. Tamami, C. Betrabet and G. L. Wilkes, "New Ceramer High Optical Abrasion Resistant Transparent Coating Materials Based on Functionalized Melamine and Tris(M‑Aminophenyl)phosphine Oxide Compound,” Polymer Bulletin, 30, 39‑45, (1993).

 

179.  J. T. Muellerleile, B. G. Risch, D. E. Rodrigues, G. L. Wilkes and D. M. Jones, "Crystallization Behavior and Morphological Features of LARC‑CPI,” Polymer, 34, 4, 789‑806, (1993).

 

180.  D. C. McHerron and G. L. Wilkes, "Apparent Reversal of Physical Aging in Amorphous Glassy Polymers by Electron Beam Irradiation,” Polymer, 34, No. 5, pg. 915‑924, (1993).

 

181.  B. Tamami, C. Betrabet and G. L. Wilkes, "Synthesis and Application of Abrasion Resistant Coating Materials Based on Functionalized Bis and Tris Maleimides,” Polym. Bull., 30, 393‑399, (1993).

 

182.  D. V. Dounis, J. C. Moreland, G. L. Wilkes, D. A. Dillard and R. B. Turner, "The Mechano‑Sorptive Behavior of Flexible Water‑Blown Polyurethane Foams,” J. Appl. Polym. Sci., 50, 293‑301, (1993).

 

183.  V. Dave, W. G. Glasser and G. L. Wilkes, "Cellulose‑Based Fibers from Liquid‑Crystalline Solutions. II. Processing and Morphology of Acetate/Butyrate Esters,” J. Polym. Sci., Part B: Polym. Phys., 31, 1145‑1161, (1993).

 

184.  J. C. Moreland, G. L. Wilkes, C. G. Moreland, S. S. Sankar, E. O. Stejskal and R. B. Turner, "Solid State NMR Characterization of Motion in Flexible Polyurethane Foams,” J. Applied Polym. Sci., 52, 1175-1180, (1994).

 

185.  J. C. Moreland, G. L. Wilkes and R. B. Turner, "Viscoelastic Behavior of Flexible Slabstock Polyurethane Foams: Dependence on Temperature and Relative Humidity. I. Tensile and Compression Stress (Load) Relaxation,” J. Applied Polymer Science, 52, 549-568, (1994).

 

186.  J. C. Moreland, G. L. Wilkes and R. B. Turner, "Viscoelastic Behavior of Flexible Slabstock Polyurethane Foams as a Function of Temperature and Relative Humidity. II. Compressive Creep Behavior,” J. Applied Polymer Science, 52, 569-576, (1994).

 

187.  B. Wang and G. L. Wilkes, "Novel Hybrid Inorganic‑Organic Abrasion Resistant Coatings Prepared by a Sol‑Gel Process,” J.M.S.-Pure Appl. Chem., A31(2), 249-260, (1994).

 

188.  J. M. Wescott, T. H. Yoon, D. Rodrigues, L. A. Kiefer, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of Triphenylphosphine Oxide-Containing Poly(Aryl Imide)-Poly(Dimethyl Siloxane) Randomly Segmented Copolymers,” J.M.S.-Pure Appl. Chem., A31(8), 1071-1085, (1994).

 

189.  J. C. Moreland, G. L. Wilkes, R. B. Turner and E. G. Rightor, "Characterization of Flexible Slabstock Foams Containing Lithium Chloride,” J. Appl. Polym. Sci., 52 1459-1476, (1994).

 

190.  B. G. Risch, I-Yuan Wan, J. E. McGrath and G. L. Wilkes, "Generation and Structure-Property Behavior of Novel Liquid Crystalline Foams Produced via a Gas Supersaturation Technique,” J. Appl. Polym. Sci., 53, 933-951, (1994).

 

191.  M. H. Brink, D. K. Brandom, G. L. Wilkes and J. E. McGrath, "Synthesis and Characterization of a Novel "3F"-Based Fluorinated Monomer for Fluorine-Containing Polyimides,” Polymer, 35, No. 23  5018-5023, (1994).

 

192.  M. E. Rogers, T. E. Glass, S. J. Mecham, D. Rodrigues, G. L. Wilkes and J. E. McGrath, “Perfectly Alternating Segmented Polyimide-Polydimethyl Siloxane Copolymers via Transimidization,” J. Polym. Sci.: Part A: Polym. Chem., 32, 2663-2675, (1994).

 

193.  C. S. Betrabet and G. L. Wilkes, “Determining the Extent of Reaction by 29Si NMR of Abrasion Resistant Hybrid Sol-Gel Coatings Based on Triethoxysilane Functionalized Organics,” J. Inorganic and Organometallic Polymers, 4, No. 4, (1994).

 

194.  B. G. Risch and G. L. Wilkes, “Effects of Physical Aging and Carbon Dioxide Absorption in Bisphenol-A Polycarbonate,” J. Appl. Polym. Sci., 56, 1511-1517, (1995).

 

195.  D. K. Brandom and G.  L. Wilkes, “Study of the Multiple Melting Behaviour of the Aromatic Polyimide LaRC CPI-2, “Polymer, 35, No. 26, pg. 5672-5677, (1994).

 

196.  Donald Loveday, Garth L. Wilkes, Mukesh C. Bheda, Ya. X. Shen and Harry W. Gibson, “Structure-Property Relationships in Segmented Polyviologen Ionene Rotaxanes,” J. Macromol. Sci.-Pure Appl. Chem., A32(1), 1-27, (1995).

 

197.  C. Betrabet and G. L. Wilkes, “Effect on Microstructure of Acid-Catalyzed PTMO/TEOS and PTMO/TIOPR Hybrids When Aged in Neutral and Alkaline Aqueous Solutions,” Chem. of Materials, 7, 535-545, (1995).

 

198.  K. A. Mauritz, I. D. Stefanithis, S. V. Davis, R. W. Scheetz, R. K. Pope, G. L. Wilkes and Hao-Hsin Huang, “Microstructural Evolution of a Silicon Oxide Phase in a Perfluorosulfonic Acid Ionomer by an In Situ Sol-Gel Reaction,” J. Appl. Polym. Sci., 55, 181-190, (1995).

 

199.  D. Loveday, G. L. Wilkes, C. D. DePorter and J. E. McGrath, “Structure and Properties of Butadiene-tert--Butyl Methacrylate and Butadiene/Styrene-tert--Butyl Methacrylate Triblock Copolymer Ionomers,” Macromolecules, 28, 7822-7830, (1995).

 

200.  S. Srinivas, J. R. Babu, J. S. Riffle and G. L. Wilkes, “Thermal Characterization and Crystallization of Novel Poly(Arylene Ether Ether Sulfide)s,” Polymer, 36, No. 17, 3317-3325, (1995).

 

201.  J. Wen and G. L. Wilkes, “Synthesis and Characterization of Abrasion Resistant Coating Materials by the Sol-Gel Approach: I. Coatings Based on Functionalized Aliphatic Diols and Diethylenetriamine,” J. Inorganic & Organometallic Polymers, 5,(4) pg. 343, (1995).

 

202.  D. K. Brandom and G. L. Wilkes, “Influence of Thermal Imidization on the Crystallization and Melting Behavior of the Aromatic Polyimide, LaRC CPI-2,” Polymer, 36(21), 4083-4089, (1995).

 

203.  J. Wen, V. J. Vasudevan and G. L. Wilkes, “Abrasion Resistant Inorganic/Organic Coating Materials Prepared by the Sol-Gel Method,” J. Sol-Gel Sci. & Tech., 5, 115-126, (1995).

 

204.  B. G. Risch, D. E. Rodrigues, K. Lyon, J. E. McGrath and G. L. Wilkes, “Structure-Property Behavior of Poly(ether ether ketone)-Polydimethylsiloxane Block Copolymers and Their Ketamine Precursors,” Polymer, 37, No. 7, pg. 1229-1242, (1996).

 

205.  B. G. Risch, S. Srinivas, G. L. Wilkes, J. F. Geibel, C. Ash, S. White and M. Hicks, “Crystallization Behavior of Poly(p-phenylene sulfide): Effects of Molecular Weight Fractionation and Endgroup Counter-ion,” Polymer, 37, No. 16, pp. 3623-3636, (1996).

 

206.  S. Srinivas, M. Graham, M. H. Brink, S. Gardner, R. M. Davis, J. E. McGrath and G. L. Wilkes, “Influence of Melt Stability on the Crystallization Behavior of Bis(4-aminophenoxy)benzene-Oxydiphthalic Anhydride Based Polyimides,” Polymer Engineering & Science, 36, No. 14, 1928-1940, (1996).

 

207.  Ta-hua Yu and G. L. Wilkes, “Orientation Determination and Morphological Study of High Density Polyethylene (HDPE) Extruded Tubular Films: Effect of Processing Variables and Molecular Weight Distribution,” Polymer, 37, No. 21, 4675-4687, (1996).

208.  Jianye Wen and G. L. Wilkes, “Surface Modification of Ethylene-Vinyl Alcohol (EVOH) Copolymer Films by the Attachment of Triethoxysilane Functionality,” Polym. Bull., 37, 51-57, (1996).

 

209.  S. White, M. J. Hicks, S. R. F. McCartney and G. L. Wilkes, “Rheological Investigation of Shear-Induced Structure Changes in Multi-Block Copolymers,” J. Appl. Polym. Sci., 61, 663-673, (1996).

 

210.  J. Wen and G. L. Wilkes, “Organic/Inorganic Hybrid Network Materials by the Sol-Gel Approach,” Chem. Mater., 8, 1667-1681, (1996).

 

211.  R. Greer and G. L. Wilkes, “Process Structure Property Relationships in Electron Beam Generated Cellular Materials, J. Appl. Polym. Sci., 62, 1115-1128, (1996).

 

212.  Ta-Hua Yu and G. L. Wilkes, “Influence of Molecular Weight Distribution on the Melt Extrusion of High Density Polyethylene (HDPE): Effects of Melt Relaxation Behavior on Morphology and Orientation in HDPE Extruded Tubular Films,” J. Rheol., 40(6), 1079-1093, Nov./Dec., (1996).

 

213.  Y. C. Jean, Y. Rhee, Y. Lou, D. Shelby and G. L. Wilkes, “Anisotropy of Hole Structures in Oriented Polycarbonate Probed by Two-Dimensional Angular Correlation of Annihilation Radiation,” J. Polym. Sci.: Part B: Polym. Physics, 34, 2979-2985, (1996).

 

214.  D. Loveday, G. L. Wilkes, Youngkwan Lee and R. F. Storey, “Investigation of the Structure and Properties of Polyisobutylene-Based Telechelic Ionomers of Narrow Molecular Weight Distribution, Part I,” Journal Applied Polymer Science, 63, 497-506, (1997).

 

215.  D. Loveday, G. L. Wilkes, Youngkwan Lee and R. F. Storey, “Investigation of the Structure and Properties of Polyisobutylene-Based Telechelic Ionomers of Narrow Molecular Weight Distribution, Part II: Mechanical,” Journal Applied Polymer Science, 63, 507-519, (1997).

 

216.  S. Srinivas, F. E. Caputo, M. Graham, S. Gardner, R. M. Davis, J. E. McGrath and G. L. Wilkes, “Semicrystalline Polyimides Based on Controlled Molecular Weight Phthalimide End-Capped 1,3-Bis(4-aminophenoxy)benzene and 3,3’,4,4’-Biphenyltetracarboxylic Dianhydride: Synthesis, Crystallization, Melting, and Thermal Stability,” Macromolecules, 30, No. 4, 1012-1022, (1997).

 

217.    S. Srinivas, J. R. Babu, J. S. Riffle and G. L. Wilkes, “Kinetics of Isothermal and Nonisothermal Crystallization of Novel Poly(Arylene Ether Ether Sulfide)s,” Polym. Engr. & Sci., 37, No. 3, 497-510, March, (1997).

 

218.    D. Loveday and G. L. Wilkes, “The Structural Features of Low Molecular Weight Ionic Diblock Polymers Based on Group Transfer Polymerized Methacrylates,” JMS-Pure Appl. Chem., A34 (5), pp. 807-818, (1997).

 

219.    Hongyi Zhou and Garth L. Wilkes, “Orientation Anisotropy of the Mechanical a Relaxation of High Density Polyethylene Films Having a Well-Defined Stacked Lamellar Morphology,” Macromolecules, 30, 2412-2421, (1997).

 

220.    H. Zhou and G. L. Wilkes, “Comparison of Lamellar Thickness and Its Distribution Determined from DSC, SAXS, TEM, and AFM for High Density Polyethylene Films Having a Stacked Lamellar Morphology,” Polymer, 38, No. 23, 5735, (1997).

 

221.    D. V. Dounis and G. L. Wilkes, “Effect of Toluene Diisocyanate Index on Morphology and Physical Properties of Flexible Slabstock Polyurethane Foams,” J. Appl. Polym. Sci., 66, 2395-2408, (1997).

 

222.    S. Srinivas, J. R. Babu, J. S. Riffle and G. L. Wilkes, “Crystallization and Morphology of Poly(Arylene Ether Ether Sulfide)s: Dual Spherulitic Morphology,” J. Macromol. Sci.-Phys., B36(4), 455-474, (1997).

 

223.    Dimitrios V. Dounis and G. L. Wilkes, “Structure-Property Relationships of Flexible Polyurethane Foams,” Polymer, 38, (11) pp. 2819-2828, (1997).

 

224.    D. V. Dounis and G. L. Wilkes, “Influence of Diethanolamine on Hard Segment Ordering in Flexible Polyurethane Foams,” J. Appl. Polym. Sci., 65, 525-537, (1997).

 

225.    D. K. Brandom, J. P. deSouza, D. G. Baird and G. L. Wilkes, “New Method for Producing High-Performance Thermoplastic Polymeric Foams,” J. Appl. Polym. Sci., 66, 1543-1550, (1997).

 

226.    J. Wen, B. Dhandapani, S. T. Oyama and G. L. Wilkes, “Preparation of Highly Porous Silica Gel From Poly(Tetramethylene Oxide) (PTMO)/Silica Hybrids,” Chem. of Materials, 9, 1968-1971, (1997).

 

227.    D. E. Rodrigues, B. G. Risch and G. L. Wilkes, “Phase Separation Behavior of Silicate Phases Grown in Poly(methyl methacrylate) by a Sol Gel Process,” Chem. of Materials, 9, 2709-2719, (1997).

 

228.    Q. Hu. E. Marand, S. Dhingra, D. Fritsch, J. Wen and G. L. Wilkes, “Poly(amide-imide)/TiO2 Nano-Composite Gase Separation Membranes: Fabrication and Characterization,” J. Membrane Sci., 135, 65-79, (1997).

 

229.    Ta-hua Yu and G. L. Wilkes, “Orientation Determination and Morphological Study of High Density Polyethylene (HDPE) Extruded Tubular Films,” J. Plastic Film & Sheeting, 13, (299-310) October 1997.

 

230.    C. Li and G. L. Wilkes, “The Mechanism for 3-Aminopropyltriethoxysilane to Strengthen the Interface of Polycarbonate Substrates with Hybrid Organic-Inorganic Sol-Gel Coatings,” J. Inorganic & Organometallic Polymers, 7(4), pg. 203 (1997).

 

231.    H. Zhou and G. L. Wilkes, “Orientation-Dependent Mechanical Properties and Deformation Morphologies for Uniaxially Melt-Extruded High-Density Polyethylene Films Having an Initial Stacked Lamellar Texture,” J. Mat. Sci., 33, 287-303, (1998).

 

232.    C. G. Robertson and G. L. Wilkes, “Refractive Index: A Probe for Monitoring Volume Relaxation During Physical Aging of Glassy Polymers,” Polymer, 39(11), 2129-2133, (1998).

 

233.    H. Zhou and G. L. Wilkes, “Creep Behaviour of High Density Polyethylene Films Having Well-Defined Morphologies of Stacked Lamellae with and Without An Observable Row-Nucleated Fibril Structure,” Polymer, 39(16), 3597-3609 (1998).

 

234.    M. D. Shelby and G. L. Wilkes, “The Effect of Molecular Orientation on the Physical Aging of Amorphous Polymers--Dilatometric and Mechanical Creep Behavior,” Polymer, 30 (26) 6767-6779 (1998).

 

235.    S. Srinivas and G. L. Wilkes, “Structural and Relaxation Studies During Crystallization of New TPI Polyimide,” Polymer, 39 (23), 5839-5851 (1998).

 

236.    R. W. Greer and G. L. Wilkes, “Apparent Reversal of Physical Aging by Electron Beam Irradiation - Further Investigations,” Polymer, 39 (18), 4205-4210 (1998).

 

237.    M. D. Shelby and G. L. Wilkes, “Thermodynamic Characterization of the Oriented State of Bisphenol-A Polycarbonate as it Pertains to Enhanced Physical Aging,” J. Polym. Sci.: Part B: Polym. Phys., 36, 2111-2128 (1998).

 

238.    V. Ratta, E. J. Stancik, A. Ayambem, H. Parvatareddy, J. E. McGrath and G. L. Wilkes, “A Melt-Processable Semicrystalline Polyimide Structural Adhesive Based on 1,3-bis-(4-aminophenoxy)benzene and 3,3’,4,4’-biphenyltetracarboxylic Dianhydride,” Polymer, 40, 1889-1902 (1999).

239.    C. G. Robertson, J. E. Monat and G. L. Wilkes, “Physical Aging on an Amorphous Polyimide:  Enthalphy Relaxation and Mechanical Property Changes,” J. Polym. Sci.: Part B: Polym. Physics, 37, 1931-1946 (1999).

240.    B. D. Kaushiva, S. R. McCartney, G. R. Rossmy and G. L. Wilkes, “Surfactant Level Influences n Structure and Properties of Flexible Slabstock Polyurethane Foams,” Polymer, 41, 285-310 (2000).

241.    V. Ratta and G. L. Wilkes, “Crystallization and Multiple Melting Behavior of a New Semicrystalline Polyimide Based on 1,3-bis(4-aminophenoxy) Benzene (TPER) and 3,3’,4,4’-biphenonetetracarboxylic dianhydride (BTDA),” Polymeric Materials Science and Engineering, 81, 303 (1999).

 

242.    Bryan D. Kaushiva and G. L. Wilkes, “Influence Of Diethanol Amine (DEOA) On Structure-Property Behavior Of Molded Flexible Polyurethane Foams,” J. Applied Polym. Sci., 77, 202-216 (2000).

 

243.    K. Jordens and G. L. Wilkes, “Novel Ceramer Materials Based on Poly(propylene oxide) and Tetramethoxysilane: Comparison of ACCLAIM™ Polyether Polyol and JEFFAMINE® Polyoxyalkyleneamine as the Poly(Propylene Oxide) Source,” J. Macromol. Sci.- Pure Applied Chem., A37(3), 177-203 (2000).

 

244.    K. Jordens and G. L. Wilkes, “Novel Ceramer Materials Based on JEFFAMINE® Poly(propylene oxide) Oligomers and Tetramethoxysilane,” J. Macromol. Sci. - Pure Applied Chem, A37(3), 145-175 (2000).

 

245.    C. Li, K. Jordens and G. L. Wilkes, “Hybrid Inorganic-Organic Sol-Gel Derived Abrasion Resistant Coatings,” MRS, accepted.

 

246.    V. Ratta, A. Ayambem, R. Young, J. E. McGrath and G. L. Wilkes, “Thermal Stability, Crystallization Kinetics And Morphology Of A New Semicrystalline Polyimide Based On 1,3-bis (4-aminophenoxy) benzene And 3,3’, 4,4’-biphenyltetracarboxylic Dianhydride,” Polymer, 41, 8121-8138 (2000).

 

247.    Bryan D. Kaushiva, D. V. Dounis and G. L. Wilkes, “Influences Of Copolymer Polyol On Structural and Viscoelastic Properties In Molded Flexible Polyurethane Foams,” J. Applied Polym. Sci., 78, 766-786 (2000).

 

248.    C. Li, T. Glass and G. L. Wilkes, “NMR Studies of Sol-Gel Derived Hybrid Materials Based on Triethoxysilylated Diethylenetriamine and Tetramethoxysilane,” J. Inorganic and Organometallic Polymers, 9(2), pg.79, June 1999.

 

249.    K. Jordens, G. L. Wilkes, J. Janzen, D. C. Rohlfing and M. B. Welch, “The Influence Of Molecular Weight And Thermal History On The Thermal, Rheological, And Mechanical Properties of Metallocene-Catalyzed Linear Polyethylenes,” Polymer, 41, 7175-7192 (2000).

 

250.    C. Li and G. L. Wilkes, “Morphology of Inorganic-Organic Hybrid Materials Derived from Triethoxysilylated Diethylenetriamine and Tetramethoxysilane,” J. Macromol. Sci.-Pure and Applied Chem., A37(6), 549-571 (2000).

 

251.    B. Kaushiva and G. L. Wilkes, “Alteration of Polyurea Hard Domain Morphology by Diethanol Amine (DEOA) in Molded Flexible Polyurethane Foams,” Polymer Communication, 41, 6981-6986 (2000).

 

252.    C. G. Robertson and G. L. Wilkes, “Correlation Between Physical Aging Rates and Glass Transition Cooperativity (Fragility): Part 1. Experimental Results,” Macromolecules, submitted.

 

253.    C. G. Robertson and G. L. Wilkes, “Long-Term Volume Relaxation of Bisphenol-A Polycarbonate and Atactic Polystyrene,” Macromolecules Communication to the Editor, 33, 3954-3955 (2000).

 

254.    M. D. Shelby, A. J. Hill, M. I. Burgar and G. L. Wilkes, “The Effect of Molecular Orientation on the Physical Aging and Mobility of Polycarbonate-Solid State NMR and Dynamic Mechanical Analysis,” J. Polym. Sci. Part B: Polym. Physics, 39, 32-46 (2001).

 

255.    B. D. Kaushiva and G. L. Wilkes, “Uniaxial Orientation Behavior and Consideration of the Geometric Anisotropy of Polyurea Hard Domain Structure in Flexible Polyurethane Foams,” Polymer Communications, 41, 6987-6991 (2000).

 

256.    C. G. Robertson and G. L. Wilkes, “Physical Aging Behavior of Miscible Blends Containing Atactic Polystyrene and Poly(2,6-dimethyl-1,4-phenylene oxide),” Polymer, 41, 9191-9024 (2000).

 

257.    C. Li, K. Jordens and G. L. Wilkes, “Abrasion Resistant Coatings for Soft Metallic Substrates by Sol-Gel Reactions of a Triethoxysilylated Diethylenetriamine and Tetramethoxysilane, Wear, 242, 152-159 (2000).

 

258.    C. G. Robertson and G. L. Wilkes, “Glass Formation Kinetics of Miscible Blends of Atactic Polystyrene and Poly(2,6-dimethyl-1,4-phenylene oxide),” J. Polym. Sci.: Part B: Polym. Physics, 39, 2118-2129 (2001).

 

259.    K. Jordens and G. L. Wilkes, “Transparent, Abrasion Resistant Coatings for Metal Substrates,” J. Macromolecular Sci.-Pure & Applied Chem., A38, No. 2, 185 (2001).

 

260.    C. G. Robertson and G. L. Wilkes, “Correlation Between Physical Aging Rates and Glass Transition Cooperativity (Fragility): Part 2. Adam-Gibbs Predictions, Macromolecules, submitted.

 

261.    D. Godshall, C. White and G. L. Wilkes, “Effect of Compatibilizer Molecular Weight and Maleic Anhydride Content on the Interfacial Adhesion of Polypropylene-PA6 Bicomponent Fibers,” J. Appl. Polym. Sci., 80, 130-141 (2001).

 

262.    M. B. Johnson, G. L. Wilkes, A. M. Sukhadia and D. C. Rohlfing, “On the Optical Properties of Blown and Cast Polyethylene Films: Surface Versus Bulk Structural Considerations,” J. Applied Polym. Sci., 77, 2845-2864 (2000).

 

263.    C. G. Robertson and G. L. Wilkes, “Physical Aging Behavior of Miscible Blends of Poly(Methyl Methacrylate) and Poly(Styrene-Co-Acrylonitrile),” Polymer, 42, 1581-1589 (2001).

 

264.    B. D. Kaushiva, G. L. Wilkes, C. Comeaux and L. Socha, “Structure-Property Relationships of Poly(tetrafluoroethylene)-Poly(tetrafluoroethylene-co-vinylidene fluoride-co-hexafluoropropylene) Blends,” Polymer, 42, 4619-4633 (2001).

 

265.    V. Ratta, A. Ayambem, J. E. McGrath and G. L. Wilkes, “Crystallization and Multiple Melting Behavior of a New Semicrystalline Polyimide Based on 1,3-bis(4-aminophenoxy)benzene (TPER) and 3,3’,4,4’-biphenonetetracarboxylic dianhydride (BTDR),” Polymer 42, 6173-6186 (2001).

 

266.    M. B. Johnson and G. L. Wilkes, “Microporous Membranes of Polyoxymethylene from a Melt-Extrusion Process: (I) Effects of Resin Variables and Extrusion Conditions,” J. Appl. Polym. Sci., 81, 2944-2963 (2001).

 

267.    V. Ratta, G. L. Wilkes and T. K. Su “Structure-Property-Processing Investigations of the Tenter-Frame Process for Making Biaxially Oriented HDPE Film. I. Base Sheet and Draw Along the MD,” Polymer, 42, 9059-9071 (2001).

268.    G. L. Wilkes, “Hybrid Organic-Inorganic Materials, Structural and Compositional Characterization of,” Ency. Of Materials: Science & Technology, 3867-3878 (2001).

 

269.    P. Rangarajan, V. A. Bhanu, D. Godshall, G. L. Wilkes, J. E. McGrath and D. G. Baird, “Dynamic Oscillatory Shear Properties of Potentially Melt Processable High Acrylonitrile Terpolymers,” Polymer, 43, 2699-2709 (2002).

 

270.    C. Li and G. L. Wilkes, “Silicone/Amine Resin Hybrid Materials as Abrasion Resistant Coatings,” Chem. Materials, 13, 3663-3668 (2001).

 

271.    M. B. Johnson and G. L. Wilkes, “Investigations of the Processing-Structure-Property Relationships of Isotactic Poly(4-Methyl-1-Pentene Tubular Extruded Films,” J. Plastic Film & Sheeting, 17, 95-112 (2001).

 

272.    V. A. Bhanu, P. Rangarajan, K. Wiles, M. Bortner, M. Sankarpandian, D. Godshall, T. E. Glass, A. K. Banthia, J. Yang, G. Wilkes, D. Baird and J. E. McGrath, “Synthesis and Characterization of Acrylonitrile Methyl Acrylate Statistical Copolymers as Melt Processable Carbon Fiber Precursors,” Polymer, 43, 4841-4850 (2002).

 

273.    M. B. Johnson and G. L. Wilkes, “Microporous Membranes of Isotactic Poly(4-methyl-1-pentene) from a Melt-Extrusion Process. I. Effects of Resin Variables and Extrusion Conditions,” J. Appl. Polym. Sci., 83, 2095-2113 (2002).

 

274.    M. J. O’Sickey, B. D. Lawrey and G. L. Wilkes, “Structure-Property Relationships of Poly(urethane urea)s with Ultra-low Monol Content Poly(propylene glycol) Soft Segments. I. Influence of Soft Segment Molecular Weight and Hard Segment Content,” J. Appl. Polym. Sci., 84, 229-243 (2002).

 

275.    M. J. O’Sickey, B. D. Lawrey and G. L. Wilkes, “Structure-Property Relationships of Poly(urethane urea)s with Ultra-low Monol Content Poly(propylene glycol) Soft Segments. Part II. Influence of Low Molecular Weight Polyol Components,” Polymer, 43, 7399-7408 (2002).

 

276.    M. B. Johnson and G. L. Wilkes, “Microporous Membranes of Isotactic Poly(4-methyl-1-pentene) from a Melt-Extrusion Process. II. Effects of Thermal Annealing and Stretching on Porosity,” J. Appl. Polym. Sci., 84, 1076-1100 (2002).

 

277.    M. B. Johnson and G. L. Wilkes, “Microporous Membranes of Polyoxymethylene from a Melt-Extrusion Process:  II. Effects of Thermal Annealing and Stretching on Porosity,” J. Appl. Polym. Sci., 84, 1762-1780 (2002).

 

278.    Qin Lin, Jeremy Pasatta, Zhen-He Wang, Varun Ratta, Garth L. Wilkes and Timothey E. Long, “Synthesis and Characterization of Sulfonated Liquid Crystalline Polyesters,” Polymer International, 51, 540-546 (2002).

 

279.    A. M. Sukhadia, D. C. Rohlfing, M. B. Johnson and G. L. Wilkes, “A Comprehensive Investigation of the Origins of Surface Roughness and Haze in Polyethylene Blown Films,” J. Appl. Polym. Sci., 85, 2396-2411 (2002).

 

280.    A. Aneja and G. L. Wilkes, “On the Issue of Urea Phase Connectivity in Formulations Based on Molded Flexible Polyurethane Foams,” J. Appl. Polym. Sci., 85, 2956-2967 (2002).

 

281.    E. G. Rightor, S. G. Urquhart, A. P. Hitchcock, H. Ade, A. P. Smith, G. E. Mitchell, R. D. Priester, A. Aneja, G. Appel, G. Wilkes and W. E. Lidy, “Identification and Quantitation of Urea Precipitates in Flexible Polyurethane Foam Formulations by X-Ray Spectromicroscopy,” Macromolecules, 35, 5873-5882 (2002).

 

282.    A. Aneja and G. L. Wilkes, “Exploring Macro- and Microlevel Connectivity of the Urea Phase in Slabstock Polyurethane Foam Formulations Using Lithium Chloride as a Probe,” Polymer, 43, 5551-5561 (2002).

 

283.    P. Rangarajan, J. Yang, V. Bhanu, D. Godshall, J. McGrath, G. Wilkes and D. Baird, “Effect of Comonomers on Melt Processability of Polyacrylonitrile,” J. Appl. Polym. Sci., 85, 69-83 (2002).

284.    G. L. Wilkes, “Polymers, Mechanical Behavior,” Ency. Physical Sci. & Technology, 12, 697-722, Academic Press (2002).

 

285.    Jignesh P. Sheth, Jiannong Xu and Garth L. Wilkes, “Solid State Structure-Property Behavior of Semicrystalline Poly(ether-block-amide) PEBAX® Thermoplastic Elastomers,” Polymer, 44, 743-756 (2003).

 

286.    A. Aneja, G. L. Wilkes, E. Yurtsever and I. Yilgor, “Influence of Lithium Chloride on the Morphology of Flexible Slabstock Polyurethane Foams and Their Plaque Counterparts,” Polymer, 44, 757-768 (2003).

 

287.    A. Aneja, G. L. Wilkes and E. G. Rightor, “Study of Slabstock Flexible Polyurethane Foams Based on Varied Toluene Diisocyanate Isomer Ratios,” J. Polym. Sci.: Part B: Polym. Physics, 41, 258-265 (2003).

 

288.    A. Aneja., G. L. Wilkes, I. Yilgor, E. Yilgor and E. Yurtsever, “Exploring Urea Phase Connectivity in Molded Flexible Polyurethane Foam Formulations Using LiBr as a Probe,” Journal of Macromolecular Science. Part B.:  Physics, B42, 1125-1139 (2003).

 

289.    D. Godshall, P. Rangarajan, D. G. Baird, G. L. Wilkes, V. A. Bhanu and J. E. McGrath, “Incorporation of Methyl Acrylate in Acrylonitrile Based Copolymers: Effects on Melting Behavior,” Polymer, 44, 4221-4228 (2003).

 

290.    D. Godshall, G. Wilkes, R. K. Krishnaswamy, and A. M. Sukhadia, “Processing-Structure-Property Investigation of Blown HDEP Films Containing Both Machine and Transverse Direction Oriented Lamellar Stacks,” Polymer, 44, 5397-5406 (2003).

 

291.    A. Aneja. and G. L. Wilkes. “A Systematic Series of ‘Model’ PTMO Based Segmented Polyurethanes Reinvestigated Using Atomic Force Microscopy,” Polymer, 44, 7221-7228 (2003).

 

292.    D. Godshall and G. L. Wilkes. “Influence of Resin Molecular Weight on Moisture Permeability of HDPE Blown Films,” Journal of Plastic Flms and Sheeting, 19 (3) 197-208 (July 2003).

 

293.    P. Gupta and G. L. Wilkes, “Some Investigations on the Fiber Formation by Utilizing a Side-by-Side Bicomponent Electrospinning Approach,” Polymer, 44, 6353-6359 (2003).

 

294.    M. J. O’Sickey, B. D. Lawrey, and G. L. Wilkes, “Structure-Property Relationships of Poly(urethane-urea)s with Ultralow Monol Content of Poly(propylene glycol) Soft Segments.  III. Influence of Mixed Soft Segments of Ultralow Monol Poly(propylene glycol), Poly(tetramethylene ether glycol), and Tri(propylene glycol),” J. Appl. Poly. Sci., 89, 3520-3529 (2003).

 

 

295.    M. G. McKee, G. L. Wilkes, R. H. Colby, and T. E. Long, “Correlations of Solution Rheology with Electrospun Fiber Formation of Linear and Branched Polyesters,” Macromolecules, 37(5), 1760 (2004).

 

296.    A. Aneja. and G. L. Wilkes, “Hard Segment Connectivity in Low Molecular Weight Model ‘Trisegment Polyurethanes Based on Monols,” Polymer, 45, 927-935 (2004).

 

297.    S. Sohn., B. Tamami and G. L. Wilkes. “Incorporation of Carbon Dioxide into Soybean Oil and Subsequent Preparation and Studies of Non-Isocynate Polyurethane Networks,” Journal of Applied Polymer Science, 92, 883-891 (2004).

298.    J. Xu, M. Johnson, and G. L. Wilkes, “A Tubular Film Extrusion of Poly(vinylidene fluoride): Structure/Process/Property Behavior as a Function of Molecular Weight,” Polymer, 45, 5327-5340 (2004).

 

299.    J. P. Sheth, A. Aneja, and G. L. Wilkes, “Exploring Long-Range Connectivity of the Hard Segment Phase in Model Tri-Segment Oligomeric Polyurethanes Via Lithium Chloride,” Polymer, 45, 5979-5984 (2004).

300.    J. P. Sheth, A. Aneja, G. L. Wilkes, E. Yilgor, G. E. Atilla, I. Yilgor and F. L. Beyer, “Influence Of System Variables On The Morphological and Dynamic Mechanical Behavior Of Polydimethylsiloxane Based Segmented Polyurethane And Polyurea Copolymers: A Comparative Perspective,” Polymer, 45 (2004) 6919-6932.

301.    P. Gupta and G. L. Wilkes, “In Situ Photocrosslinking Of Cinnamate Functionalized Poly(Methyl Methacrylate-co-2-Hydroxy Ethyl Acrylate) Fibers During Electrospinning,” Macromolecules, 37 (2004), 9211-9218.

302.    H. L. Schreuder-Gibson, P. Gibson, P. Tsai, P. Gupta, G. Wilkes, “Cooperative Charging Effects of Fibers from Electrospinning of Electrically Dissimilar Polymers,” Proceedings of the International Nonwovens Technical Conference, Toronto, September 2004, (Winter 2004) 39-45.

303.    S. A. Guelcher, K. M. Gallagher, J. E. Didier, D. B. Klinedinst, J. S. Doctor, A. S. Goldstein, G. L. Wilkes, E. J. Beckman, and J. O. Hollinger, “Synthesis of Biocompatible Segmented Polyurethanes from Aliphatic Diisocyanates and Diurea Diol Chain Extenders,” accepted for publication in ACTA BIOMATERIALA.